How To Install Nest Camera

Install Nest Cam Outdoor

Make sure you've prepare your Nest Cam Outdoor with the Nest app before you mount information technology. This article picks up where that one left off.

Watch a video overview

Here's a video yous can watch that volition walk y'all through the steps to install your Nest Cam Outdoor. Read below for additional information or if you need assistance with any of the steps.

How to gear up and install Nest Cam Outdoor

1. Get started

Make sure yous've fix your Nest Cam Outdoor with the Nest app before yous mount it. This commodity picks up where that one left off. If you haven't selected a spot to put your camera however, hither are some tips to assist yous decide. Where to put your camera so you tin can go along an centre on what you lot desire > How to protect your Nest photographic camera from tampering > Walk over to the intended spot with your telephone or tablet (but not your camera yet), and see whether y'all tin get a Wi-Fi signal on your device. This will give y'all a full general thought most Wi-Fi in that area. If there's no betoken at all, yous'll need to observe another spot. Think about the path of the power cablevision on its fashion to the outlet. Nosotros've included cable clips that tin attach it to walls, eaves, and other surfaces. The clips keep the cable secure and give it a cleaner expect. Direct sunlight can cause glare and heat up your camera across the recommended 104° F (twoscore° C). Look for a shaded spot such as an eave or overhang to install your camera. Be sure to review the Safety Guidelines for mounting your camera.

2. Tools you'll demand

Many of the items you'll demand are included in the box: mounting magnet, camera wall plate, adapter wall plate, cable clips to secure your cablevision, wall screws, and even wall anchors for hard surfaces similar brick or stone. To install the wall plate and cable clips, yous'll need a Philips screwdriver and a drill with a 3/32" bit. If you'll be using the wall anchors, yous'll also need a seven/32" masonry drill bit and a hammer.

three. Options for plugging in your camera

Nest Cam Outdoor'southward total power cable length is 25 ft (seven.5m). You'll need to plug information technology into an outlet so it can stream video 24/7 and send alerts. You have two options:

Use an outdoor outlet

The easiest option is to plug information technology into an outdoor outlet. Y'all might want to install a lockable "while in apply" cover over the outlet to prevent your camera from being unplugged.

Apply an adapter

If you don't have an outdoor outlet, you tin can use a low-cal socket adapter, which converts a porch or landscaping light into a ability outlet.

4. Mount your photographic camera

Now that yous've prepared your supplies, and decided where you want to put your camera, information technology's time to mountain it.

Learn well-nigh your camera's mounting magnet

Nest Cam Outdoor's versatile mounting magnet helps yous signal your camera exactly where yous want. The back of Nest Cam Outdoor attaches magnetically to the double-sided magnet mount. This lets you mount your camera two ways: you can stick the camera and its mounting magnet to a magnetic surface like a galvanized steel gutter, or you can install the included metal wall plate on a not-metal surface and stick the camera with its mounting magnet to the plate.

Then y'all can twist and plow the camera on the mounting magnet to go the view you want. We designed information technology with a broad range of motion.

If you end upwards installing your photographic camera upside downward, such as under an eave, yous tin rotate your camera on the mounting magnet so that it'southward right side upwards. Or if the photographic camera needs to stay upside downward, for example if you're running the cable to an outlet in a higher place the photographic camera, you can leave your photographic camera as it is and flip the video correct side upwardly with the Nest app.

You have ii options for installing your Nest Cam Outdoor. Both are detailed in the sections beneath.

Option 1: Install the wall plate and mount your camera on brick, wood, or other not-metal surface

If you don't have a metallic surface that the mounting magnet can adhere to, you lot tin can install the camera'due south metal wall plate. Then, yous can stick your Nest Cam and its mounting magnet to the plate and rotate your camera to become the image you want.

1. Connect the camera to the power adapter Insert the camera'south USB connector into the power adapter. Of import: Printing the collar all the manner in and twist clockwise to lock it. This volition help ensure a weatherproof seal.

2. Plug in the ability cablevision and adapter

Brand sure at that place's enough length from the outlet to the camera. You tin temporarily run the cable along the path you've planned for it, including eaves and whatsoever right-angle bends along walls.

3. Check Wi-Fi coverage with your photographic camera

Hold your camera up where you lot desire to install it, and view the video stream with the Nest app. If the photographic camera can't connect to Wi-Fi, or if the video stream is interrupted, y'all might demand to pick some other location where the signal is stronger. Even a few inches can make a difference. See more Wi-Fi troubleshooting suggestions in the following commodity. Troubleshooting when your photographic camera is offline> If you lot demand to install your photographic camera beyond the range of your existing network, you lot can try using a Wi-Fi extender.

iv. Install the wall plate

Once you've made certain your camera can stream video from the spot y'all've chosen, information technology'due south time to install the camera's wall plate. Remove the protective sticker and bankroll cream from the wall plate. We recommend you beginning drill airplane pilot holes with a 3/32" bit, and and then attach the wall plate with the screws. If the wall is fabricated of a material like brick or rock, yous may need to utilise the included wall anchors. Use a 7/32" masonry bit to drill holes for the anchors. Gently tap each anchor into the wall with a hammer until it'due south flush with the surface. So attach the wall plate with the screws.

5. Adhere photographic camera to wall plate

Once the plate is secure, adhere the mounting magnet to the wall plate. And then attach Nest Cam to the mounting magnet and aim it where you like. Now you can remove the sticker from your Nest Cam'southward lens; it's merely there for protection during shipping and installation. You tin can check your camera'southward video stream in the Nest app to fine-tune its position.

6. Secure the cable

Next, y'all'll need to secure the ability adapter and cable. Don't skip this step, which makes it harder for your camera to exist accidentally dislodged or tampered with.

Selection 2: Attach your camera to a metallic surface using the magnet

Y'all tin deeply attach your photographic camera to a metal surface fabricated of steel or iron. Go along in heed, the mounting magnet won't stick to other metals like aluminum or copper.

ane. Connect the camera to the power adapter Insert the camera's USB connector into the power adapter. Important: Printing the neckband all the way in and twist clockwise to lock it. This volition aid ensure a weatherproof seal.

two. Plug in the power cable and adapter

Brand sure there's enough length from the outlet to the camera. Yous tin temporarily run the cablevision forth the path you lot've planned for it, including eaves and any right-angle bends along walls.

iii. Attach camera

Attach the mounting magnet to the back of the camera, and identify the other side on the metallic surface. Since the magnetic power of different metal surfaces can vary, test that the grip is strong enough to securely concur your camera. If you lot try to attach your camera to a curved surface, like a calorie-free pole, the magnet won't be able to make full contact and it might not concur. So we recommend attaching information technology to a apartment spot on the metal surface.

4. Cheque Wi-Fi coverage with your photographic camera

If the camera can't connect to Wi-Fi, or if the video stream is interrupted, yous might need to pick another location where the signal is stronger. Fifty-fifty a few inches can make a departure. Come across more than Wi-Fi troubleshooting suggestions in the post-obit article. Troubleshooting when your camera is offline> If you need to install your camera across the range of your existing network, yous can try using a Wi-Fi extender. If y'all haven't done so yet, remove the sticker from your Nest Cam'due south lens; it's simply there for protection during shipping and installation.

5. Secure the cable

One time you've made sure your camera tin can stream video from its location, you'll need to secure the ability adapter and cablevision. Don't skip this step, so that it makes information technology harder to accidentally dislodge or be tampered with.

v. Secure the power adapter and cable

Whichever manner y'all mounted your photographic camera, you'll need to attach your power adapter and cable to a wall or other surface to keep it secure. This also gives everything a tidy wait.

1. Install the first cable clip

Install the first clip inside 6 inches (15cm) of your camera. This can help secure your camera'south position and prevent damage if it ever gets knocked off of its magnetic mount. Hither's how to install each prune: We recommend drilling airplane pilot holes beforehand. Use a 3/32" (2 mm) flake for wood and like materials. Or, if you're installing the wall anchors on brick or stone, use a 7/32" (half dozen mm) masonry fleck and then gently tap the anchor into the hole with a hammer. Insert the cable into the clip. Screw the clip straight into the wall, or into the anchor. Note: If y'all're tightening the screw with a drill, exist conscientious not to drill into the cable itself. The cablevision should exist fully inserted into the clip, keeping it away information technology from the screw

2. Install the ability adapter

Nosotros recommend installing the adapter at to the lowest degree eighteen inches (l cm) above the footing in example of flooding or deep snow. We included an adapter wall plate for this purpose. Place the adapter plate with the flat side facing the wall. Drill a pigsty and insert a wall anchor if needed. Employ one of the screws to mount the plate. Then snap the adapter on.

3. Install the balance of the cable clips

Install the 2nd cable clip close to where the USB ring connects to the power adapter. Install the third clip close to the outlet so that the cable will be harder to unplug. Install equally many of the other clips every bit you need to route the cable from your photographic camera to the outlet.

iv. Tidy up the extra cable (optional)

If you end up with extra cablevision length, here are some tips to continue things looking neat: The cablevision includes a velcro strap, so you can coil the cable and secure information technology with the strap. Then you can conceal it behind something else, like landscaping or an overhang. Or you can install a junction box along the road to comprise the extra cable.

You lot tin paint the power cord and the cable clips to match your home then they alloy in and are harder to spot. If you added a junction box, you lot can pigment it too. Don't paint the power adapter or the photographic camera itself.

6. Finish up

Remove the sticker on the lens if you oasis't already. Wipe off whatever grit or dirt with a soft lint-gratuitous cloth

You can pigment the cable and the clips to match your abode.Practise non paint the photographic camera, this can bear on performance and void your warranty.

7. Start using your camera

Was this helpful?

How tin nosotros amend it?

Source: https://support.google.com/googlenest/answer/9228553?hl=en

Posted by: kosstrumsess.blogspot.com

Share this post